Chery X55 Pro Front Bumper (Part No.: 602001262AADQJ)
To put it simply, this is the "front-end safety barrier, styling centerpiece, and aerodynamic optimizer" of your Chery X55 Pro. As a core front exterior and structural component, it is installed at the outermost front of the vehicle, integrating with the front fenders, hood, and headlamps. Its core role is to absorb and mitigate external impacts—such as low-speed collisions, flying stones, and scratches—to protect the front-end body, engine compartment, and key components (like headlamps and radiators). Meanwhile, its integrated design aligns with Chery’s global safety standards, shapes the X55 Pro’s tough and sleek front silhouette, optimizes aerodynamics to reduce wind resistance, and provides mounting positions for fog lamps, radar, and other accessories, balancing safety, aesthetics, and practicality.
At its core, it consists of four key components that work together to ensure reliable protection and long-term durability: a reinforced PP/EPDM outer panel, a high-strength steel
anti-collision beam, foam energy-absorbing blocks, and precision mounting brackets with sealing strips[4]. Following the modern automotive bumper design concept, it adopts a three-layer composite structure: the PP/EPDM outer panel (resistant to impact, corrosion, and UV rays) forms the exterior shape; the hidden high-strength steel anti-collision beam (1.5mm thick cold-rolled steel) bears and disperses impact force during collisions; the foam energy-absorbing blocks buffer the impact between the outer panel and the beam, reducing damage to the body and protecting pedestrians to a certain extent. The sealing strips and precision connectors ensure tight fitting with adjacent components, preventing water and dust intrusion.
Without this
front bumper, the Chery X55 Pro’s front-end safety and aesthetics would be severely compromised: the front body and internal components would be exposed to external impacts and debris, leading to easy damage and rust; the front-end styling would lose integrity and look incomplete; wind resistance would increase, affecting driving stability and fuel efficiency; accessories like fog lamps and front radar would lack mounting supports, losing their functions. Chery has tailor-made the 602001262AADQJ front bumper according to the X55 Pro’s front-end structure and safety standards, with customized dimensions, curvature, and mounting points that perfectly match the original vehicle’s body lines and electrical system. A generic aftermarket front bumper is likely to have mismatched dimensions (resulting in unsightly gaps), inferior material strength (easily cracking or deforming), or non-compliant safety performance (failing to absorb impact effectively), undermining safety, durability, and aesthetics.
Compatibility: Exclusive to Chery X55 Pro
This front bumper (602001262AADQJ) is specially designed for Chery X55 Pro models. Incorrect matching will affect safety, functionality, and aesthetics. Please pay attention to the following compatibility information:
Compatible Models: All variants of Chery X55 Pro (matches the front-body structure, mounting points, and accessory installation positions of the model; the part number 602001262AADQJ confirms its dedicated configuration).
Incompatible Models:
Other Chery Models (e.g., Arrizo series, Tiggo series): Different front-body dimensions, mounting points, and styling designs mean it cannot be installed properly, and forced installation may damage the vehicle body.
Non-Chery Vehicles: Even if the appearance is similar, the body structure, mounting standards, and safety requirements are quite different, leading to incompatible installation and poor protection performance.
Chery X55 (Non-Pro Variants): Different front-end styling and dimensions, resulting in mismatched installation and inconsistent aesthetics.
Installation & Maintenance: Professional Operation Recommended
Installation: 30–45 Minutes (Requires Professional Tools & Alignment)
Replacing this front bumper involves disassembling front accessories (fog lamps, radar) and precise alignment with adjacent components. Improper operation may lead to installation gaps, accessory malfunction, or reduced protection performance. Therefore, professional installation by qualified technicians is strongly recommended (painting may be required if the new bumper is unpainted):
Preparation: Park the Chery X55 Pro on a flat ground, turn off the engine, and disconnect the battery (if necessary). Remove the front fog lamps, front radar, and license plate from the old bumper to avoid damage during disassembly.
Remove the Old Bumper: Use professional tools to loosen and remove the mounting bolts and screws connecting the old bumper to the front fenders, hood, and body. Disconnect any related wiring (for fog lamps/radar), then gently pull the old bumper outward to separate it from the vehicle body.
Install the New Bumper: Align the 602001262AADQJ with the front-body mounting points, temporarily fasten the bolts. Reconnect the wiring for fog lamps and radar, then adjust the bumper’s position to ensure uniform gaps with the front fenders, hood, and headlamps. Tighten all bolts to the specified torque.
Reassemble & Test: Reinstall the fog lamps, radar, license plate, and other accessories. Check the bumper’s installation stability and gap uniformity. Test the functions of fog lamps and front radar to confirm they work normally. Clean the bumper surface and check for any scratches or damage.
Brief Summary: Chery X55 Pro Front Bumper (602001262AADQJ)
As a core front exterior and structural component of Chery X55 Pro, this front bumper is installed at the vehicle’s outermost front, integrating with front fenders, hood and headlamps. Its core role is to absorb and mitigate low-speed collisions and flying stone impacts, protecting the front body, engine compartment and key components, while shaping the vehicle’s front silhouette, optimizing aerodynamics and providing mounting positions for fog lamps and radar.
Key features include a reinforced PP/EPDM outer panel, high-strength steel anti-collision beam, foam energy-absorbing blocks, and precision mounting brackets with sealing strips. It is exclusively compatible with all Chery X55 Pro variants, incompatible with other Chery models, non-Chery vehicles and non-Pro X55 variants.
Professional installation takes 30–45 minutes. Maintenance requires regular surface cleaning, sealing/gap checks, impact damage inspection and accessory mounting checks. Original parts ensure safety compliance, perfect fit, reliable durability and consistent aesthetics, avoiding aftermarket defects.
