Chery FX Rear Taillights (Part No.: 605000690AA)
To put it simply, this is the "core safety warning device and styling signature at the rear of your Chery FX." It’s not just a simple lighting assembly, but a key rear-end safety and decorative component installed on the
left or
right side of the vehicle’s rear (confirm the exact side via VIN). Its core job is to emit clear and distinguishable light signals in various driving scenarios—including red brake lights, amber turn signals, red position lights, and white reverse lights—to accurately convey the vehicle’s driving intentions (braking, turning, reversing, or parking) to following vehicles, thereby ensuring driving safety day and night, especially in low-visibility conditions like rain or fog. Meanwhile, its design is perfectly integrated with the Chery FX’s rear body lines, shaping the unique visual identity of the vehicle’s rear end. Manufactured in strict accordance with automotive safety standards, it integrates high-transmittance materials, a stable light source system, and a professional waterproof structure, balancing reliable safety performance, long-term durability, and stylish appearance.
At its core, it consists of four key components that work together to ensure stable and efficient operation: a high-transmittance PC lampshade, a multi-functional light source module, a professional waterproof sealing ring, and a precision mounting bracket with a dedicated circuit connector. Installed at the rear of the vehicle, it acts as a "silent safety communicator": on one hand, the multi-functional light source module (equipped with reliable light-emitting components) ensures fast response and sufficient brightness of each light function—for example, the brake light lights up instantly when braking, allowing following vehicles to react in time to avoid rear-end collisions; on the other hand, the high-transmittance PC lampshade, anti-scratch and anti-UV treatment, ensures that the light is not attenuated and can maintain good light transmittance even after long-term use. In addition, the professional waterproof sealing ring tightly fits the gap between the lamp body and the vehicle body, effectively preventing rainwater, dust, and road debris from entering the interior, ensuring stable operation in harsh weather conditions.
Without this rear
taillight, the safety of your Chery FX’s rear end would be seriously compromised: following vehicles would not be able to accurately judge your driving intentions, greatly increasing the risk of traffic accidents such as rear-end collisions and side collisions; at the same time, the rear styling of the vehicle would lose its integrity and uniqueness. Chery has tailor-made the light shape, brightness parameters, mounting dimensions, and circuit interfaces of this taillight (605000690AA) according to the Chery FX’s rear body structure and electrical system characteristics. It can perfectly match the vehicle’s original body control module (BCM), ensuring that there is no gap after installation and no circuit mismatch issues. A generic aftermarket rear taillight, however, is likely to have problems such as insufficient light brightness (failing to meet safety warning requirements), incompatible circuit parameters (causing short circuits or false warnings), or mismatched styling (destroying the overall beauty of the vehicle’s rear end), which will seriously affect driving safety and vehicle aesthetics.
Compatibility: Exclusive to Chery FX
This rear taillight (605000690AA) is specially designed for Chery FX models. Incorrect matching will not only affect the use effect but also bring potential safety hazards. Please pay attention to the following compatibility information:
Compatible Models: All variants of Chery FX (matches the rear body structure, electrical system parameters, and styling design of the model; please confirm the left/right installation side through the vehicle’s VIN code to avoid wrong purchase).
Incompatible Models:
Other Chery Models (such as Tiggo series, Arrizo series): Different rear body dimensions, circuit system standards, and mounting point positions mean that installation is not possible, and forced installation may damage the vehicle’s circuit or body structure.
Non-Chery Vehicles: Even if the appearance is similar, the body structure, electrical interface, and light parameter requirements are quite different, so functional matching cannot be achieved, and serious safety hazards will occur during use.
Installation & Maintenance: Professional Operation Recommended
Installation: 20–30 Minutes (Requires Professional Tools & Circuit Knowledge)
Replacing this rear taillight involves the vehicle’s electrical system and requires precise alignment with the vehicle body. Improper operation may lead to circuit faults or installation gaps. Therefore, it is strongly recommended to be installed by professional and qualified technicians. The general installation process is as follows:
Preparation: Park the Chery FX on a flat ground, turn off the engine, and disconnect the battery to avoid electric shock. Open the trunk and remove the interior trim panel corresponding to the rear taillight (use a plastic pry tool to avoid scratching the trim) to expose the mounting bolts and circuit connector of the taillight.
Remove the Old Taillight: Use a professional tool to unscrew the mounting bolts that fix the old taillight to the vehicle body, gently pull the taillight outward to separate it from the vehicle body, then carefully disconnect the circuit connector (pay attention to the connection direction to avoid damaging the pins).
Install the New Taillight: First, connect the circuit connector of the 605000690AA to the vehicle’s circuit, then align the taillight with the mounting points on the rear body, and fasten the mounting bolts to the specified torque. Check to ensure that the taillight fits seamlessly with the vehicle body without gaps or tilting.
Test & Reassemble: Reconnect the battery, start the vehicle, and test all functions of the taillight one by one (brake, turn, position, reverse) to ensure that each light can be lit normally, with stable brightness and no flicker. After confirming that there is no problem, reinstall the interior trim panel.
Brief Summary: Chery FX Rear Taillights (605000690AA)
As a core rear-end safety and decorative component of Chery FX, this taillight serves as a "safety warning core and styling signature." It emits multi-functional light signals (brake, turn, position, reverse) to convey driving intentions clearly, enhances visibility in bad weather, integrates seamlessly with the rear body styling, and features reliable waterproof and dustproof performance.
Key features include high-transmittance PC lampshade, multi-functional light source module, waterproof sealing ring, and precision mounting bracket. It is exclusively compatible with all Chery FX variants (confirm left/right via VIN) and incompatible with other Chery models or non-Chery vehicles.
Professional installation takes 20–30 minutes. Maintenance requires regular function checks, surface cleaning, and sealing/circuit inspections. Original parts ensure compliance with safety standards, perfect matching, and reliable durability, avoiding aftermarket issues like insufficient brightness and electrical faults.
