601000517AA

Brand: Chery

Model: Tiggo 7 Pro

Product Name：Left Side Mirror Frame

Part Number: 601000517AA

Contact Now WhatsApp

Product Details

Chery Tiggo 7 Pro Left Side Mirror Frame (Part No.: 601000517AA)

Let me break it down for you—this thing is like the “backbone” of your Chery Tiggo 7 Pro’s left rearview mirror. It’s not just some plastic shell, you know? It’s a super important structural part that holds all the mirror’s bits together: the glass, the little motor that adjusts it, and even the heating element if your mirror has one. Plus, it keeps those inner parts safe from road junk, bad weather, and small bumps. It’s made to fit the Tiggo 7 Pro’s side look perfectly—tough, useful, and looks like it belongs there.

Here’s what’s in it. First, there’s a strong ABS plastic body mixed with glass fiber to make it extra tough—so it can take small hits (like brushing a tree branch) and won’t crack even when it’s super cold (-30°C) or hot (80°C). Then there are pre-drilled holes—these line up with the mirror’s inner parts and the car door, so you don’t have to drill new ones. There’s also a sealed edge to keep rain, dust, or snow out of the mirror. Some versions even come painted to match your Tiggo 7 Pro’s color, or have a textured surface for a sporty vibe. It’s mounted on the left front door, acting like the “outer case” of the rearview mirror—holds all the moving and electric parts inside, and blends right into the car’s side.

Now, imagine if you didn’t have this frame. Your Tiggo 7 Pro’s left mirror would fall apart: the glass would rattle or even fall off, the inner motors would be exposed and get damaged, and water would mess up the electric parts (like the heater or adjustment motor). Chery made this frame just for the Tiggo 7 Pro—right shape, right size, right holes—so it fits like a glove. A generic frame? It either won’t hold the parts tight, let water or dirt in, or look totally out of place on the car.

1. Core Jobs: Hold It Together, Keep It Safe, and Look Good

This frame’s the foundation of the Tiggo 7 Pro’s left mirror—here are the three things it has to do:

Hold all parts in place: It keeps the mirror glass, adjustment motor, and any extras (like turn signal lights or heaters) exactly where they need to be. That way, the mirror works smoothly—no loose bits or parts that won’t line up.

Protect from damage: It shields the inner parts from road stuff (stones, flying trash, small scrapes with curbs) and bad weather (heavy rain, ice, sun damage). This makes the mirror last way longer.

Match the car’s look: It fits the Tiggo 7 Pro’s exterior—color, shape, texture—so the car stays looking like it did from the factory. No weird, mismatched, or bulky parts that ruin the side view.

This left side mirror frame is exclusive to Chery Tiggo 7 Pro—wrong fit means functional or aesthetic issues:

Fits: All Chery Tiggo 7 Pro variants (matches the mirror’s internal component layout, door mounting points, and exterior styling; confirm via VIN, especially for color-matched versions).

Won’t Fit:

Other Chery models: Like Tiggo 8 Pro, Arrizo 5, or FX—different mirror sizes, internal component designs, or door shapes (frame won’t hold parts or attach to the door).

Non-Chery vehicles: Even if the shape looks similar, their mirror component positions and door mounting holes differ (no secure fit, leading to loose parts).

Chery Tiggo 7 Pro’s right side: Left and right mirror frames are mirror images (different mounting hole positions and curve directions)—this part is for the left only (right side needs a different part number).

 Installation & Maintenance (DIY-Friendly with Basic Tools)

Installation: 25–40 Minutes (Requires Screwdriver, Trim Tool)

Replacing this frame is straightforward—here’s how:

Prep: Disconnect the Tiggo 7 Pro’s battery (if the mirror has electrical components). Use a plastic trim tool to remove the small cover inside the left door (to access the mirror’s mounting bolts).

Remove the old mirror assembly: Unscrew the bolts holding the entire mirror to the door, then disconnect the wiring harness (for electric/heated mirrors). Pull the mirror off the door and set it on a soft surface (to avoid scratching the glass).

Swap the frame: Remove the screws holding the old frame to the mirror’s internal components (glass, motor). Carefully detach the old frame, then align the new 601000517AA with the components and reattach the screws.

Reinstall the mirror: Reconnect the wiring harness (if applicable), mount the mirror back to the door, and tighten the bolts. Replace the door trim cover and reconnect the battery.

Brief Summary: Chery Tiggo 7 Pro Left Side Mirror Frame (Part No.: 601000517AA)

A critical structural part for Chery Tiggo 7 Pro’s left rearview mirror, this frame acts as the “mirror backbone”—securing mirror glass, adjustment motor, and heating element (if equipped), while shielding internal parts from debris/weather. It’s precision-molded, blending durability, functionality, and the car’s side styling.

Key features: reinforced ABS plastic body (glass fiber for toughness), pre-drilled mounting holes (easy alignment), weather-sealed edge (water/dust-proof), and optional color-matched finish. Without it, the mirror falls apart (loose glass, damaged electronics).

Fits all Tiggo 7 Pro variants (confirm via VIN for color-matched versions); won’t fit other Chery models, non-Chery cars, or Tiggo 7 Pro’s right side.

Installation takes 25–40 mins (DIY-friendly with screwdriver/trim tool). Maintain by weekly cleaning, monthly crack/seal checks, avoiding impacts, and touch-up scratches (color-matched frames). Original parts avoid aftermarket risks (poor fit, weak materials).

601000517AA