Chery Tiggo 7 Pro Front Shock Absorber (LH, Part No.: 202000360AA)

First of all, let's briefly analyze: The front shock absorber (LH) 202000360AA of the Chery G7 Pro is not merely a "metal tube" - it is the "shock absorber and stabilizer" of your left front suspension. It can be imagined as a precise hydraulic component, connected between the left front wheel hub and the frame of the Tiger 7 Pro. What is its main job? Absorb bumps, potholes and road vibrations to keep your drive smooth and keep the left front wheel grounded and the vehicle stable when turning or suddenly stopping. Without it, every jolt would shake the driver's cabin, and the car would feel shaky or hard to control.

This left (left) front shock absorber is specially designed for the Chery Ggo 7 Pro model - please be sure to check your vehicle identification number or user manual! Its design complies with the weight, suspension geometry and ride comfort standards of the Tiger 7 Pro: Its hydraulics are calibrated to handle the front weight of the car (without too soft or too hard rides), its mounting points are perfectly aligned with the frame and wheels (without forced installation), and it works with the front springs to balance stability and comfort. General-purpose shock absorber? You will encounter some problems: it is too soft (the car will sag when braking), too hard (bumpy), or incompatible (wears out quickly) - which undermines comfort and safety.

Core work: Why is this shock absorber important for cycling and safety

Its function is dual comfort and control. It does three key things for your tigo 7 Pro:

Buffering road vibrations: Inside the shock absorber, hydraulic oil flows through small valves to slow down the movement of the suspension. This can reduce the impact of bumps, potholes or rough roads - no more bumps that shake your body or the interior of your car.

Stabilize your body: Prevent excessive rollover (tilting) when turning left or right, nose dive when braking suddenly, and squat down when accelerating. This can keep the car level, so you can have better grip and be more confident behind the steering wheel.

Protect suspension components: By absorbing shock, reduce the pressure on other front suspension components (such as control arms, ball joints and wheel bearings). This extends their lifespan - there is no need to frequently replace expensive components.

• Fits These Models: All Chery Tiggo 7 Pro variants (matches front suspension design, weight capacity, and mounting specs—confirm via VIN).

• Won’t Fit These:

• Right front (RH) of Tiggo 7 Pro: Right shocks have reversed top mounts or spring seats—this LH one won’t align with the right side.

• Rear suspension of Tiggo 7 Pro: Rear shocks are shorter, softer (handles less weight), and have different mounts—no fit or damping.

• Other Chery models (e.g., Tiggo 3X, Arrizo 6 Pro): Their weight and suspension setups differ—shock will be too stiff/soft or won’t bolt on.

• Non-Chery vehicles: Even if it “looks similar,” the mounting points and damping rate are wrong—causes unstable rides or suspension damage.

Installation & Maintenance (Pros Only—Precision Is Non-Negotiable!)

Installation: Certified Chery Technicians Mandatory

1. Prep the suspension: Techs lift the car, remove the left front wheel, and disconnect the shock from the hub and frame (careful not to damage the spring or other parts).

2. Install the new shock: They bolt 202000360AA into place, ensuring the spring is properly seated on the spring seat. They torque all bolts to Chery’s exact specs (too loose = clunking; too tight = damage).

3. Align and test: They perform a front-end alignment (critical!) to fix wheel angles (worn shocks throw off alignment). Then they test-drive to check for bumps, noise, or body roll—ensuring smooth, stable handling.

Maintenance: Keep It Damping Smooth

• Check for oil leaks monthly: Look for wet, oily spots on the shock tube (leaking oil means it’s failing—replace immediately, as it can’t absorb shocks anymore).

• Listen for noises: If you hear “clunking” or “rattling” from the left front over bumps, the dust cover is broken or the top mount is worn—get it inspected.

• Replace in pairs: If one front shock fails, replace both left and right (mismatched shocks cause uneven handling and faster wear on the new one).

Summary: Chery Tiggo 7 Pro Front Shock Absorber (LH, 202000360AA)

Contact us