Established in 2011 and located in Jinan, China, Shandong Victory Car Parts Technology Co., Ltd. is a respected manufacturer and reliable supplier of high-performance spare parts for Chinese vehicles. Leveraging deep industry knowledge and a strong commitment to quality, the company specializes in producing precision-engineered components that consistently meet or exceed the stringent requirements of China’s top automotive manufacturers. Celebrated for their strength, reliability, and superior performance, Shandong Victory’s products are supported by rigorous quality assurance protocols and attentive customer service. Over the years, the company has built lasting partnerships with clients across both domestic and international markets. Through the integration of advanced manufacturing technologies and a forward-looking approach to industry developments, Shandong Victory continues to diversify its product offerings to address the evolving demands of different vehicle models. With innovation and customer satisfaction at the heart of its mission, the company is dedicated to contributing to the advancement of the global automotive sector and creating long-term value for partners around the world.
204000116AA
Spin smoothly: The little rolling parts inside (balls or rollers) cut friction between the stationary steering knuckle and moving wheel hub. This lets the front wheels spin free, saves gas, and makes steering easier.
Hold weight: It supports the full front-end weight of the Tiggo 7 Pro (up to 2 tons) and stays strong—even when you turn hard, stop suddenly, or drive on rough roads.
Stay aligned: Keeps the front wheel in line with the steering system. This stops the tire from scraping, wearing unevenly, and the car from “pulling” to one side—super important for safe driving.
Fits: All Chery Tiggo 7 Pro variants (matches the front hub size, steering knuckle dimensions, and load capacity; confirm via VIN—note differences between 2WD/4WD models if applicable).
Won’t Fit:
Other Chery models: Like Tiggo 8 Pro, Arrizo 5, or FX—different front hub sizes, weight capacities, or mounting flange designs (bearing won’t attach or support the load).
Non-Chery vehicles: Even if the shape looks similar, their front-end weight and hub dimensions differ (no functional fit—bearing seizes or causes wheel misalignment).
Tiggo 7 Pro’s rear wheels: Rear hub bearings have different load capacities and mounting styles—this part is for the front only (rear needs a different part number).
Prep: Lift the Tiggo 7 Pro safely with a jack and secure it on stands. Remove the front wheel, brake caliper, and brake rotor to access the hub assembly.
Remove Old Bearing: Use a hub press to press the old bearing out of the steering knuckle. Clean the knuckle and hub to remove dirt or rust (prevents new bearing damage).
Install New Bearing: Press the 204000116AA into the steering knuckle (follow Chery’s press force specs—too much force damages the bearing). Secure it with the mounting bolts (torque to factory settings).
Reassemble & Test: Reinstall the brake rotor, caliper, and front wheel. Lower the car and test drive—check for abnormal noises (no grinding/humming) and ensure the steering feels smooth (no wobble).
Listen for Noises: A constant humming, grinding, or growling from the front wheels (louder at higher speeds) means the bearing is worn—replace it immediately to avoid failure.
Check for Wheel Play: Jack up the front end and wiggle the wheel back and forth—excessive play (more than 1mm) indicates a loose or worn bearing.
Avoid Water Damage: Don’t drive through deep puddles or floodwater—water can seep past the seal and rust the bearing’s internal parts.
Winter Care: After driving on salted roads, rinse the front wheels with water—road salt accelerates bearing corrosion (even with a seal).
Company Introduction
Contact us
