Chery Tiggo 3X Steering Outer Tie Rod (Left, Part No.: J69-3401430)

Let’s get straight to it—this isn’t just a “metal rod” under your Tiggo 3X. It’s the left-front steering system’s “force-transmitting & positioning core”: a precision-engineered component made of high-strength steel, with a durable ball joint at one end. Mounted between the left front wheel’s steering knuckle and the steering rack’s inner tie rod, it’s a key link in translating your steering wheel movements into actual wheel turns. Think of it as a “steering messenger”—when you turn the wheel, it transfers the steering rack’s force to the left front wheel, guiding it to the correct angle. Without it, the steering wheel would lose connection to the wheel, making the vehicle impossible to steer accurately, and even risking loss of control.

Core function: Accurate steering and keeping the wheels in a straight line

As an important component of the steering system, it is responsible for vehicle control and safety - here are three main things for your Tiger 3:

Transmitting steering force: It is like a hard connector that connects the bogie and the left front wheel. When you turn the steering wheel, the steering rack pushes or pulls the inner pull rod, and then drives the outer pull rod to turn the left front wheel to the Angle you want.

Keep the wheels correctly aligned: Its fixed length and precise connection ensure that the left front wheel remains in the correct arc and toe Angle. This can prevent uneven tire wear, reduce road resistance, and keep the car in a straight line when you are driving fast.

Absorb minor vibrations: The built-in ball joint enables it to perform minute rotational movements, absorbing slight vibrations from roads or bumpy surfaces. This reduces steering wheel shake, making driving more comfortable without disrupting steering accuracy.

• Fits These Models: All Chery Tiggo 3X variants (matches the steering rack specs, steering knuckle size, and wheel alignment parameters—confirm via VIN).

• Won’t Fit These:

• Tiggo 3X’s right front side: Different length and thread direction (steering adjustment would be reversed—can’t install).

• Other Chery models (e.g., Tiggo 3, Tiggo 5X): Different steering system layouts and component sizes—tie rod doesn’t align or connect.

• Non-Chery vehicles: Even if similar in appearance, steering force requirements and mounting structures differ—causes steering instability.

• Tiggo 3X with modified steering systems: Aftermarket steering racks or knuckles may have altered dimensions—original tie rod won’t fit.

 Installation & Maintenance (Pros Only—Safety & Alignment Critical!)

Installation: Must Be Done by Certified Technicians

1. Prep the vehicle: Techs lift the front of the Tiggo 3X, remove the left front wheel, and disconnect the tie rod from the steering knuckle (removing the mounting pin) and inner tie rod (unthreading the connector).

2. Install the new tie rod: They thread J69-3401430 onto the inner tie rod (matching the old rod’s length for initial alignment), secure it to the steering knuckle with the pin, and tighten all lock nuts to Chery’s exact torque specs.

3. Wheel alignment calibration: This is mandatory—techs use professional equipment to adjust the toe angle (via the tie rod’s threads) to match Tiggo 3X’s factory settings. Improper alignment causes tire wear and steering pull.

4. Test steering: They lower the vehicle, test steering wheel smoothness (no play or stiffness), and check if the vehicle drives straight without pulling—ensuring safe operation.

Maintenance: Regular Checks to Avoid Steering Risks

• Inspect dust boot monthly: Check for cracks or tears in the rubber boot. If damaged, replace immediately—dirt entering the ball joint leads to rapid wear (causing steering play).

• Check for steering play: If the steering wheel has excessive free movement (turns without wheel response), have the tie rod’s ball joint checked—worn joints need replacement.

• Look for looseness: Every 10,000km, have techs check if the tie rod is loose at the steering knuckle or inner connector—looseness causes unstable steering.

• Avoid heavy impacts: Don’t hit curbs or potholes at high speed—impact can bend the rod or damage the ball joint (leading to sudden steering failure).

Summary: Chery Tiggo 3X Left Steering Outer Tie Rod (J69-3401430)

It won’t fit Tiggo 3X’s right front, other Chery models, or non-Chery vehicles. Install by certified techs with mandatory wheel alignment; maintain by checking dust boots and looseness. Only the original ensures steering precision and driving safety.

Contact us