The SA11-58-42X-C is a right-side exterior door handle made specifically for the Haima S7. It’s a key part of the car’s outer door system—designed to match the original car’s structure, look, and how it works. It lets you open the door reliably, and it keeps the Haima S7’s original outer style too. If your factory outer door handle is broken, worn out, or not working right, this one replaces it so you can get in and out of the car smoothly and safely.
Perfect for Haima S7: The SA11-58-42X-C is made just for the Haima S7. Its mounting spots and connectors are cut precisely to line up exactly with the car’s original door parts. No need to drill extra holes, cut anything, or make other changes—just swap it in place of the original handle. Saves time for repair shops or people who like to fix their own cars.
Tough & Weatherproof: It’s made of high-quality ABS plastic (with added stuff to make it resist impacts) and has a scratch-proof, fade-proof coating. It can handle tough outdoor conditions: UV rays (so it doesn’t fade), rain, snow, and temps from -30°C to 80°C. It also stands up to daily use—like pulling it a lot—and small bumps, so it lasts a long time (usually 3 to 5 years with regular use).
Smooth & Secure to Use: Inside, the mechanical parts (like springs and latches) are just like the original. When you pull the handle, it feels crisp and consistent—no getting stuck or wiggling loose. It locks into the door’s locking system tightly, so the door opens smoothly every time and stays closed when it should.
Looks Just Like the Original: The handle’s shape, curve, and color (it comes in options that match the Haima S7’s original outer trim—like black, silver, or painted the same color as the car) blend right in with the door panel. Once you install it, you can’t tell it’s not the factory handle—it keeps the car looking like it did when it was new.
Installation: Grab a screwdriver to take off the inner door panel (so you can get to the bolts holding the handle). Disconnect the rod that links to the original handle, then take out the old handle by removing the bolts. Line up the SA11-58-42X-C with the mounting spots, bolt it in, reconnect the linkage rod, and put the inner panel back on. (Note: If you need step-by-step details, check the Haima S7’s repair manual.)
Maintenance: Wipe the handle regularly with a soft, damp cloth to get rid of dust, dirt, or road grime—don’t use rough cleaners that might scratch it. If the handle feels stiff, put a little silicone lubricant on the moving parts inside (don’t use oil-based lubricants—they attract dust).![SA11-58-42X-C SA11-58-42X-C]()
Perfect Fit for Haima S7—No GuessworkThis SA11-58-42X-C is made only for the Haima S7. Its mounting spots and connectors are cut super precisely, so they line up perfectly with the car’s original door parts. You can swap it straight in for the factory handle—no extra drilling, cutting, or messing with wires. Whether you’re a pro mechanic or someone who likes fixing their own car, installing it is a breeze. And unlike those one-size-fits-all handles, you don’t have to worry about it not fitting right.
Tough & Weather-Proof—Built to LastIt’s made of high-quality ABS plastic with extra stuff to make it resist bumps. The surface has a coating that keeps it from getting scratched or fading, even when the sun beats
down on it. It handles crazy temps too—from -30°C (super cold) to 80°C (scorching hot)—no problem. Plus, it passes industry tests: it can take over 50,000 pulls (that’s like years of daily use) and doesn’t rust from rain, snow, or road salt. Usually, it’ll last 3 to 5 years with regular use.
Smooth, Quiet & Secure—No Annoying IssuesInside, the parts (like springs and latches) are just like the original Haima S7 handle. Every time you pull it, it feels crisp and steady—no getting stuck or wiggling loose. It also doesn’t make those annoying buzzes, squeaks, or rattles that cheap handles get over time. And it locks into the door’s system tight, so you can count on the door opening smoothly every time, and staying closed when it should.
Looks Just Like the Factory One—No MismatchThe handle’s shape, curve, and color options (black, silver, or even painted to match your car’s body) are exactly like the Haima S7’s original outer parts. Once you put it on, you can’t tell it’s a replacement—it blends right into the door panel. Unlike generic handles that stick out like a sore thumb, this one keeps your car looking like it did when it was new. The finish (shiny or matte, just like the factory) also keeps that nice, premium look.
Tested for Quality—You Can Trust ItEvery SA11-58-42X-C gets checked before it ships, so it meets or beats car industry standards. They test things like:
Corrosion resistance: It passes the GB/T2423.17 test, so it won’t rust in coastal areas or snowy places where they salt the roads.
Vibration resistance: It holds up to bumps and shakes from driving fast or on rough roads—no loose parts inside.
Functional checks: It lines up with the door lock perfectly, so it never fails when you need it.
All these tests mean it’s just as reliable as (or even better than) the original handle from the factory.
If you would like to learn more about auto parts of additional brands, please feel free to contact us.