Chery FX Front Bumper Left Bracket (Part No.: 602001560AA)
Let me keep it straightforward—this is your Chery FX’s “left-side front bumper anchor.” It’s not just a tiny plastic or metal piece, you know? It’s a key front-end component that holds the left side of the front bumper firmly to the car’s chassis, keeps the bumper aligned perfectly with the body, and soaks up minor impacts (like small parking scrapes) to protect the bumper and front body panels. It’s tough, precision-molded, and designed to fit the Chery FX’s front chassis and bumper like a glove—balancing solid support, impact resistance, and long-lasting reliability.
At its core, it has three key bits: a high-strength ABS plastic or steel frame (won’t bend or crack under the bumper’s weight), pre-drilled holes that line up perfectly with the chassis and bumper’s attachment points (no extra drilling needed), and reinforced edges (handles small front collisions without breaking). Mounted on the left side of the Chery FX’s front chassis—right between the front bumper and the body frame—it acts as a “stable connector”: it stops the left side of the bumper from sagging, shifting, or popping loose (even on bumpy roads), ensures the bumper lines up flush with the headlights and front fenders (no ugly gaps that let in dirt or water), and disperses force from minor impacts (so the bumper doesn’t crack or detach in low-speed knocks).
Without this left front bumper bracket, the Chery FX’s front bumper would be wobbly on the left side: it might hang down, create uneven gaps with the body, or even come loose while driving. Small front bumps would also damage the bumper or front body directly—since there’s no bracket to absorb the hit. Chery tailored its size, shape, and mounting positions to the FX’s specific front chassis dimensions and bumper weight—so it fits tight and stays secure. A generic bracket? It’d either be too weak (can’t support the bumper), misaligned (leaving gaps), or too brittle (breaks on the first small impact)—ruining the front end’s look and protection.
![602001560AA]( "602001560AA")
What It Fits (Only for Chery FX Left Front)
This bracket is exclusive to Chery FX’s left front bumper—wrong fit spells trouble:
Fits: All Chery FX variants (matches the front chassis dimensions, bumper attachment points, and weight capacity; confirm via VIN—note differences between trim levels with unique bumper designs if applicable).
Other Chery Models: Like Tiggo, Arrizo, or X22 Cross—different front chassis shapes, bumper sizes, or mounting layouts (bracket won’t attach).
Installation & Maintenance (DIY-Friendly with Basic Tools)
Installation: 30–45 Minutes (Needs a Socket Wrench or Screwdriver)
Replacing this bracket is pretty simple—here’s how:
Prep: Park the Chery FX on a flat surface. Use a jack to lift the front left side slightly (for easier access). Locate the old left front bumper bracket (behind the left side of the front bumper).
Remove Old Bracket: Unscrew the bolts connecting the bracket to the chassis and bumper. Gently pull the bumper away from the body (just enough to reach the bracket) and take out the old part.
Install New Bracket: Position the 602001560AA in place, aligning its holes with the chassis and bumper. Bolt it tightly (follow Chery’s torque specs—too loose causes movement). Push the bumper back into place to check alignment.
Test: Lower the car and inspect the front bumper—ensure no gaps or sagging on the left side. Gently push the bumper to confirm it’s secure (no wobbling).
![602001560AA]( "602001560AA")
Brief Summary: Chery FX Left Front Bumper Bracket (Part No.: 602001560AA)
A critical front-end component for Chery FX, this left front bumper bracket acts as a "stable anchor"—securing the left side of the front bumper to the chassis, maintaining alignment with body panels (headlights, fenders), and absorbing minor impacts (up to 5km/h) to protect the bumper and front body. It’s a durable, precision-molded part balancing support, impact resistance, and reliability.
Key features: high-strength ABS/plastic/steel frame (supports 4–7kg bumper, 3–5 year lifespan), pre-drilled mounting holes (seamless fit, no extra drilling), and reinforced edges (anti-cracking, debris-resistant). Without it, the bumper sags, misaligns, or risks detachment; minor impacts cause direct damage.
Fits all Chery FX variants (confirm VIN for trim-specific designs); won’t fit other Chery models, non-Chery vehicles, or FX right front brackets.
Installation takes 30–45 minutes (DIY-friendly with basic tools). Maintain via monthly visual checks, post-impact inspections, regular cleaning, and avoiding front bumper overloading. Original parts avoid aftermarket issues (weak materials, misaligned holes, poor fit).
![602001560AA]( "602001560AA")
Contact us
![602001560AA]( "602001560AA")
